On Hook Dial - Savin 1027 Facsimile Reference Manual

RusC2FaxADEN-F_V4_FM.book Page 53 Monday, August 20, 2001 10:52 AM

On Hook Dial

This is just like using the external tele-
phone, except you do not have to pick
up the external telephone before dial-
ing. Just press the { { { { On Hook Dial} } } } key
and dial the number. If you hear a
voice, you can pick up the external tel-
ephone and speak with the other party.
Limitation
❒ This feature is not available in
some countries.
❒ On Hook Dial does not work with
ISDN lines.
❒ This feature is not available for the
optional Extra G3 Interface Unit.
❒ Chapter 2, "Adjusting Volume" in
the Basic Features manual
A A A A
Place your original, and then se-
lect any scan settings you require.
Reference
⇒ Chapter 2, "Setting Originals"
in the Basic Features manual
⇒ Chapter 2, "Scan Settings" in
the Basic Features manual
B B B B
Press the { { { { On Hook Dial} } } } key.
You will hear a low tone from the
internal speaker.
Note
❒ If you wish to cancel this oper-
ation, press the { { { { On Hook Dial} } } }
key again.
C C C C
Dial.
The machine immediately dials the
destination.
Note
❒ If you make a mistake, press the
{ { { { On Hook Dial} } } } or { { { { Clear Modes} } } }
key and try again.
D D D D
When the line is connected and
you hear a high-pitched tone,
press the { { { { Start} } } } key.
Note
❒ If you hear a voice, pick up the
external telephone before you
press the { { { { Start} } } } key and notify
the destination that you want to
send a fax message (ask them to
switch to Facsimile mode).
❒ To stop transmission, press the
{ { { { Clear/Stop} } } } key and remove
originals.
❒ After transmission, the machine
will return to standby mode.
On Hook Dial
4
53