Confidential File Report - Savin 1027 Facsimile Reference Manual

RusC2FaxADEN-F_V4_FM.book Page 31 Monday, August 20, 2001 10:52 AM
• You must enter the Confidential
ID programmed by the sender
(ID Override) when the re-
ceived file has a Confidential
ID. Confirm the sender's confi-
dential ID in advance.
The confidential ID is not shown
on the display.
Note
❒ If no Confidential Files have
been received, the message "No
reception file." is shown. Press
[Exit].
❒ If the Confidential IDs or Per-
sonal Confidential IDs do not
match, the message "No recep-
tion file under specified Confi-
dential ID." is displayed. Press
[Exit] to cancel the operation,
and then check the Confidential
ID or Personal Confidential ID
with the other party and try
again.
E E E E
Press the { { { { Start} } } } key.
The received messages are printed.
When printing has finished, the In-
formation menu is shown.
F F F F
Press [Exit].
The initial display is shown.
Printing a Confidential Message
- - If Confidential Files cannot be
- -
printed even when the
Confidential File indicator
lights
The Confidential File indicator also
lights when messages are received in
Personal Boxes. Check the Personal
Boxes.
Note
❒ If the machine received a message
with a SUB Code, print the mes-
sage from the Personal Box. ⇒ p.35
"Printing Personal Box Messages"

Confidential File Report

You can set whether this report is
printed automatically when the ma-
chine receives a Confidential File in
"User Parameters". ⇒ p.141 "Chang-
ing the User Parameters"(Switch04,
Bit0)
3
31