Muting Individual Channels Of Performance Data; Re-Recording The Pedalboard Performance - Roland Music Atelier AT-10S Owner's Manual

Muting Individual Channels
of Performance Data
You can mute (silence) individual channels of performance
data of SMF data (sold separately).
* It is not possible to mute the performance that you play on the
AT-10S (except for the Rhythm and Automatic Accompa-
niment).
1. Press the [Function] button.
2. Press the Select [-] [+] buttons to select
"Ch.Mute."
3. Press the Value [-] [+] buttons to select the
channel that you wish to mute.
From the left, these are "1 Ch. (channel 1), 2 Ch. ... 15 Ch.,
and 16 Ch."
fig.09-09
4. Press the [Rec] button.
fig.09-10
The number will change to "–," indicating that the corre-
sponding channel has been muted.
5. Once again press the [Rec] button, and muting
will be canceled.
To return to the basic screen, press the [Function] button.
* Channel mute will be defeated when you perform the following
operations.
- Use the Select [-] and [+] buttons to select different performance
data.
- Press the Select [-] [+] button simultaneously to play perfor-
mance data.
Various Other Settings (Function Button)
Silencing a Specific Track
You can temporarily silence sound of a specific track. This is
referred to as "Track Mute."
1. Press the [Function] button.
2. Press the Select [-] [+] buttons to select "Track
Mute."
3. Press the Value [-] [+] buttons to select the
track that you wish to mute.
From the left, these are "R (rhythm), A (accompaniment),
B (bass), L (lower), U (upper) and C (control)."
4. Press the [Rec] button.
The character will change to "–," indicating that the cor-
responding track has been muted.
5. Once again press the [Rec] button, and muting
will be canceled.
To return to the basic screen, press the [Function] button.
Re-recording the Pedalboard
Performance
You can erase the bass accompaniment of SMF music files
and record your own pedalboard performance, or re-record
the pedalboard performance of a song that was previously
saved on disk.
1. Press the [Function] button.
2. Press the Select [-] [+] buttons to select
"BassReplaceRec."
3. Press the Value [-] [+] buttons to switch the
Bass Replace Rec "ON" or "OFF."
ON The pedal performance will not be recorded
OFF The pedal performance will be recorded
53