Roland Music Atelier AT-10S Owner's Manual page 37

If the Following Screen will Appear
The following message below is shown when the performance song in the unit has not
been saved to floppy disk.
fig.08-10
If you wish to erase the performance song
1.
Press the [Rec] button.
If you wish to save the performance song on a floppy disk
1.
Press the [Reset] button to cancel the procedure.
2.
Save the song onto a floppy disk (p. 43).
If loading is canceled because the memory limit has been reached, the following message will be
NOTE
displayed:
fig.08-05
When the internal memory is nearly full, making further recording impossible, the following
NOTE
message will appear.
fig.08-04
Record and Playback Your Performance
37