Table of Contents
Advertisement
Various Other Settings (Function Button)
Harmony Intelligence Type
(Selecting the Type of the
Harmony Intelligence)
You can select the type of Harmony Intelligence.
1. Press the [Function] button.
2. Using the Select [-] and [+] buttons, select "Har-
mony Type."
3. Press the Value [-] [+] buttons to select a Har-
mony Intelligence.
TRADITIONAL
The component notes of the chord
you play in the lower keyboard will
sound.
OCTAVE 1
A note one octave lower than the
highest note played in the upper key-
board will sound.
To return to the basic screen, press the [Function] button.
To turn the Harmony Intelligence function on/off, refer to
"Adding Harmony to a Melody — Harmony Intelligence" (p.
28).
Transposing the Pitch of the
Pedalboard by Octaves
Octave Shift is a function that allows you to alter the pitch of
what is played on the pedalboard by one or more octaves.
1. Press the [Function] button.
2. Using the Select [-] [+] buttons, select "Octave
Shift."
3. Press the Value [-] [+] buttons to change the
setting for Octave Shift.
The value can be set to a range of +/- 2 octaves.
To return to the basic screen, press the [Function] button.
* Please note that when you apply the Octave Shift function to
certain voices, their pitch could be stretched beyond their recom-
mended note ranges, and they may not sound as expected. Care
should be taken when using Octave Shift.
50
Switching the Display of
Lyrics On or Off
Some music files have Lyrics included and these Lyrics can
be displayed on the screen. You can turn on or off the lyrics
display of such music files.
1. Press the [Function] button.
2. Use the Select [-] [+] buttons to select "Lyric."
fig.09-11
3. Press the Value [-] [+] buttons to switch the lyric
display "ON (displayed)" or "OFF (not dis-
played)."
To return to the basic screen, press the [Function] button.
* If you press a voice select button etc. while playing back music
files that contains lyrics, the display screen will switch, and the
lyrics will no longer be displayed. To re-display the lyrics, press
the [Play] button once again.
This setting remains stored in memory even while power is
turned off.
Changing the Metronome
Setting
This setting determines whether or not the metronome will
sound.
1. Press the [Function] button.
2. Using the Select [-] [+] buttons, select "Metro-
nome."
fig.09-02
3. Press the Value [-] [+] buttons to select OFF,
REC, or ON.
OFF
Not heard at all
REC
Heard only while recording
ON
Heard constantly
To return to the basic screen, press the [Function] button.
Advertisement
Table of Contents
