Changing The Key When Playing Back Songs; Intro Count Down; Changing The Sound Used For The Intro Countdown (Intro Count Down Sound) - Roland Music Atelier AT-10S Owner's Manual

Changing the Key When
Playing Back Songs
SMF music files or a performance that you yourself recorded
can be transposed for playback.
1. Press the [Function] button.
2. Using the Select [-] [+] buttons, select "Play
Transpose."
3. Press the Value [-] [+] buttons to select the
Value for transpose.
Each press of Value [-] [+] buttons transpose the key by a
semitone.
You can transpose the song within a range of -24 to +24
semitones.
To return to the basic screen, press the [Function] button.
You can transpose the keyboard for performance. For details
refer to "Transposing to a Different Key (Transpose Button)"
(p. 31).
Various Other Settings (Function Button)

Intro Count Down

If an intro is played before your performance, you can have a
countdown played to the end of the intro, allowing you to
understand easily where you are to start playing.
1. Press the [Function] button.
2. Using the Select [-] [+] buttons, select
"IntroCountDown."
3. Press the Value [-] [+] buttons to switch the
Intro Count Down "ON" or "OFF."
When you press the [Intro/Ending] button, an intro will
play, and the end of the intro will be counted-down.
To return to the basic screen, press the [Function] button.
Changing the sound used for
the intro countdown (Intro
Count Down Sound)
You can change the sound that is used for the count played at
the end of the intro with the Intro Countdown function (p.
49).
1. Press the [Function] button.
2. Using the Select [-] [+] buttons, select
"CountDownSound."
3. Press the Value [-] [+] buttons to select the type
of sound for the Intro Count Down.
VOICE Human voice count (One, two, three...)
STICK Stick sound count
To return to the basic screen, press the [Function] button.
49