Connecting External Devices; Names And Functions Of Jacks And Connectors; Making The Connections; Connecting Audio Equipment - Roland Music Atelier AT-10S Owner's Manual

Table of Contents

Advertisement

Connecting External Devices

If you want to hook up an external instrument to the AT-10S,
then this chapter is for you.
Names and Functions of
Jacks and Connectors
1
MIDI Out/In Connectors
You can connect external MIDI instruments to these
connectors to exchange performance information.
2 Output L (mono)/R Jacks
You can some awesome sounds if you connect speakers or
other audio equipment to these jacks. You can also hook up a
portable stereo to record your performances on cassette tape.
3 Computer Connector
You can connect a computer to this connector to exchange
performance information.
4 Computer Switch
Set this switch to Mac, PC-1, or PC-2 according to the type
computer that's connected.
You can also switch between connections to the MIDI Out/In
connectors and the Computer connector.
5
Pedal Connector
6
AC Inlet
Pedal
Output
Computer
PC-1
R
L (Mono)
PC-2
Stereo
5
2
3
MIDI
AC
Out
In
Mac
MIDI
4
1
6

Making the Connections

* If you're planning on connecting the AT-10S to other
equipment with cables, be sure to follow the steps shown below
to make the connections. By turning on or off devices in the
wrong order, you risk causing malfunction and/or damage to
speakers and other devices.
1. Turn down the volume all the way on all equip-
ment.
2. Turn off the power to the AT-10S and other con-
nected equipment.
3. Connect the AT-10S and other equipment with
the cables.
4. Turn on the connected equipment.
5. Turn on the AT-10S.
6. Adjust the volume.
After use, follow the steps below to switch off the power.
1. Turn down the volume all the way on all equip-
ment.
2. Turn off the AT-10S.
3. Turn off the connected equipment.

Connecting Audio Equipment

You can hook up a tape recorder or other audio device and
record your performances on the AT-10S. Use an audio cable
to connect the input jack on the audio set or amp mixer to
one of the output jacks on the AT-10S. Use an audio cable
with a standard plug. When purchasing an audio cable,
please consult the vendor where you bought the AT-10S.
Output
R
L (Mono)
Stereo
55

Advertisement

Table of Contents
loading

Table of Contents