Playing Back A Performance Song (Play Button) - Roland Music Atelier AT-10S Owner's Manual

Record and Playback Your Performance

Playing Back a Performance Song (Play Button)

Play back the performance recorded on the AT-10S.
fig.08-06
1.
Press the [Reset] button to return to the beginning of the first mea-
sure (bar).
The location at which playback will start will return to the beginning of measure 1.
2.
Press the [Play] button to start playback.
After playback reaches the end of the performance, it will stop automatically.
3.
To stop playback at any point, press the [Stop] button.
If you press the [Reset] button instead of the [Stop] button, the unit resets (returns) to the
beginning of the data.
If you press the [Play] button while holding down the [Stop] button, the metronome will play
MEMO
two measures (bars) of count-in before playback starts.
You can specify whether or not the Expression Pedal will affect the playback and what you play
MEMO
while Atelier music data is being played back (P.52).
If you use the Rhythm or Automatic Accompaniment immediately after having loaded and
NOTE
played back a song other than an Atelier performance song, such as SMF's, etc., the playback
may not sound right (the voices may have changed, etc.) To prevent this from happening, press
the [Reset] button before playback.
38
Composer
Select
Load
Demo Rename
Play
Reset Stop
1 3
Function Save
Clear
Rec
2