Stereo Bass - REVELL Performa B15 Owner's Manual

CONNECTIONS (Continued)
REVEL PERFORMA B15 SUBWOOFERS AND

STEREO BASS

Two REVEL PERFORMA B15 subwoofers can be interconnected
with a preamplifier and power amplifier for stereo bass (see Figure 13).
NOTE: Although stereo bass requires symmetrical placement, asym-
metrical placement also has advantages (see "Placement" on page 11).
Multi-Channel Controller (Decoder)
(rear)
FRONT/MAIN
Left Output CENTER Output
Right Output SUB/LFE Output
NOTE: Set Controller outputs to full-range
L/R Front and no SUB.If applicable, set all
other channels to pass 80 Hz and above.
Below 80 Hz, signals will route to the B15s.
or
or
REVEL PERFORMA B15
20
Owner's Manual
SURROUND/SIDE REAR
Left Output Left Output
Right Output Right Output
Left B15 Rear Panel
(split view)
(Optional)
To SUB/LFE Output
(use Y-adapter)
(Optional)
To SUB/LFE Output
(use Y-adapter)
Figure 13. How to connect two
REVEL PERFORMA B15
subwoofers for stereo bass.
Left Input
Main Amplifier
(rear)
Left
To Main Speakers
or
Right B15 Rear Panel
(split view)
Right Input
Right
or