Multi-Channel Controller; Using The Revel Performa B-15'S Crossover - REVELL Performa B15 Owner's Manual

Figure 10. How to connect the
REVEL PERFORMA B15
subwoofer to a home theater
multi-channel controller using
the REVEL PERFORMA B15
subwoofer's internal crossover.
Multi-Channel Controller (Decoder)
(rear)
FRONT/MAIN
Left Output CENTER Output
Right Output SUB/LFE Output
NOTE: Set Controller outputs to full-
range L/R Front and no SUB.
If applicable, set all other channels
or
to pass 80 Hz and above. Below
80 Hz, signals will route to B15.
or
REVEL PERFORMA B15 SUBWOOFER AND A
MULTI-CHANNEL CONTROLLER USING THE B15'S
INTERNAL CROSSOVER
In this application, the REVEL PERFORMA B15 subwoofer's
internal crossover is used to interconnect a home theater multi-chan-
nel controller, as shown in Figure 10.
SURROUND/SIDE REAR
Left Output Left Output
Right Output Right Output
Left Input
Main Amplifier
(rear)
Left
To Main Speakers
or
B15 Rear Panel
(split view)
REVEL PERFORMA B15
Right Input
Right
or
17
Owner's Manual