Multi-Channel Controller Without High-Pass Crossover - REVELL Performa B15 Owner's Manual

CONNECTIONS (Continued)
REVEL PERFORMA B15 SUBWOOFER WITHOUT
HIGH-PASS CROSSOVER
Revel strongly recommends using both a low-pass and high-pass
crossover with any "main" left and right loudspeakers of any size.
The use of a high-pass crossover greatly reduces distortion, increases
dynamic range, and optimizes the transition from the REVEL
PERFORMA B15 subwoofer to the main loudspeakers. If needed,
your Revel dealer can help with the proper crossover settings.
If the REVEL PERFORMA B15 subwoofer will be used without a
high-pass crossover (see Figure 11), contact your Revel dealer for
help in setting the crossover controls so the main speakers and the
REVEL PERFORMA B15 subwoofer(s) will produce an optimum
combined response.
Left Output
Preamplifier
NOTE: Use Y-adapters or
Sub Outputs on Preamplifier
(if available) to drive the B15.
Y-adapter
or
Y-adapter
Left Input
Main Amplifier
(rear)
Left
To Main Speakers
REVEL PERFORMA B15
18
Owner's Manual
Right Output
(rear)
or
Y-adapter
Right Input
Right
Figure 11. How to connect the
REVEL PERFORMA B15
subwoofer without a high-pass
crossover.
Y-adapter
or
B15 Rear Panel
(split view)
NOTE: Adjust for optimum
blend with front speakers.