Connections - REVELL Performa B15 Owner's Manual

REAR PANEL LAYOUT
(Continued)
6
Fused power connector for (enclosed) detachable IEC power
cord. If needed, replace the fuse with same type, as follows:
• For 120 V units, use a 10 A fast-blow fuse.
• For 220 V units, use a 5 A fast-blow fuse.
7
POWER Switch: Press OFF to completely turn off power to
the REVEL PERFORMA B15 subwoofer system. Press AUTO
ON to turn on automatic power. Internal sense circuits will
continually detect the presence of audio signals and will fully
turn on the power supply when needed. After some time, when
audio is no longer present, the same circuits will instruct the
power supply to enter the standby mode to conserve energy.

CONNECTIONS

Audio interconnection to your main amplifier or home theater
controller can be any combination of unbalanced or balanced
terminations, with full balanced connections offering the best
noise suppression.
Please read the following six applications (starting on the next page)
before proceeding with the actual connections. For clarity, power
connections are not shown. Also, be sure to observe the following:
• Turn off all audio system power before making any connections.
• Read the owner's manuals that were included with your audio
components to confirm their connection procedures.
• Verify correct polarities (i.e., + to + and - to -) when making
connections, as shown in Figures 8 through 13 starting on the
next page. Failure to do so will cause poor imaging and dimin-
ished bass response.
REVEL PERFORMA B15
14
Owner's Manual