Multi-Channel Controller Using The Controller's Crossover - REVELL Performa B15 Owner's Manual

CONNECTIONS (Continued)
REVEL PERFORMA B15 SUBWOOFER AND A
MULTI-CHANNEL CONTROLLER USING THE
CONTROLLER'S CROSSOVER
In this application, the REVEL PERFORMA B15 subwoofer's
internal low-pass filter is bypassed and the multi-channel con-
troller's crossover is used instead, as shown in Figure 9.
Multi-Channel Controller (Decoder)
(rear)
FRONT/MAIN
Left Output CENTER Output
Right Output SUB/LFE Output
or
or or
REVEL PERFORMA B15
16
Owner's Manual
SURROUND/SIDE REAR
Left Output Left Output
Right Output Right Output
NOTE: Set Controller to
SUB "On" and all speakers
to cross over at 80 Hz.
Use L or R Input and
Increase Low Pass Level;
*Or Use Optional
Y-adapter, If Desired.
Figure 9. How to connect the
REVEL PERFORMA B15
subwoofer to a home theater
multi-channel controller using
the controller's crossover.
Left Input
Main Amplifier
(rear)
Left
To Main Speakers
or
B15 Rear Panel
(split view)
*To SUB/LFE Output
(if using optional Y-adapter)
NOTE: Use AUX OUTPUT to
connect to INPUT on another B15.
Also see Figure 12 on page 19.
*To SUB/LFE Output
(if using optional Y-adapter)
Right Input
Right
or