Setting Carbon Ribbon - SATO LM400e Series Quick Manual

Setting carbon ribbon

Use only SATO carbon ribbons.
Use of other than approved carbon ribbons may result in unsatisfactory print quality and/or
damage to the print head and may void your warranty.
1
Open the side cover.
2
Push up the purple head lock lever in
the direction of an arrow to open the
thermal head.
3
Place the carbon ribbon on
the ribbon supply spindle and
push the ribbon roll all the way
to the inside of the printer.
(Confirm winding direction)
Thermal head
Side cover
Head lock
lever
Ribbon
supply spindle
Carbon ribbon
15