SATO LM400e Series Quick Manual page 20

4
Place the roll label on the label
supply spindle.
Slide the label stopper and
adjust to the label width.
5
Thread the label under the label
guide and pitch sensor.
Make sure that the side of label
touches the guide roller slightly.
Caution
*Thermal head and the
surrounding areas will become
hot during the printing process.
When changing the label
after printing, be careful not to
get burnt.
*Contacting the edge of thermal
head with bare hands may
result in injury.
When changing the labels, be
careful not to get injured.
Label
Pitch sensor
Guide roller
Roll label
Label stopper
Label su pply
spindle
Label guide
Label guide
10