Selecting The Cassette Type; Repeat Play; Selecting The Recording Speed; Protecting A Recorded Cassette - Samsung SV-DVD54T Instruction Manual

Selecting the Cassette Type

If you wish to use the tape counter to display the time
remaining on a cassette, you must indicate the type of
cassette inserted.
1
After pressing the MENU press the corresponding
,
buttons to select the VCR option.
❷
❿
2
Press the OK or buttons to select this option.
Result: The VCR Setup menu is displayed.
3
Press the corresponding
Tape Select option is selected.
Tape Select

Repeat Play

VCR Function
STB
❿
4
Press the OK or buttons as many times as
required, until the correct cassette length is
displayed.
E180 E240
E 300 E260
5
Press RETURN twice to exit the menu.
Repeat Play
You can set repeat play to repeat the tape continuously
from beginning to end.
Tape Select
Repeat Play
VCR Function
STB
To...
Repeat play
Do not wish to repeat play
or buttons, until the
❷
VCR Setup
E180
: E180 E240
: Off E260
E300
VCR Setup
: E180
Off
: Off
On
❿
Press OK or , until...
On is displayed.
Off is displayed.

Selecting the Recording Speed

You can record a cassette at two different speeds:
SP (Standard Play)
LP (Long Play)
In Long Play modes:
Each cassette lasts twice as long
The recording is of a slightly lower
quality
To record a cassette... Press the SPEED button on the
In standard play mode SP is displayed.
In long play mode
Type Recording Time (in SP)
E-180 180 mins. or 3 hours
E-240 240 mins. or 4 hours
E-260 260 mins. or 4 hours and 20 mins.
E-300 300 mins. or 5 hours

Protecting a Recorded Cassette

Video cassettes have a safety tab to prevent accidental
erasure. When this tab has been removed, you cannot
record on the tape.
1
If you wish to protect a cassette, break off the tab
using a small screwdriver.
2
To re-record over a protected cassette (safety tab
broken), cover the hole with adhesive tape.
ENG-17
remote control, until...
LP is displayed.