Presetting The Stations Automatically - Samsung SV-DVD54T Instruction Manual

Presetting the Stations Automatically

You do not need to preset the stations if you
have already set them automatically (see Plug &
Auto Set Up on page 8).
Your STB-DVD-VCR contains a built-in tuner used to
receive television broadcasts.
You must preset the stations received through the tuner.
This can be done:
Plug & Auto Set up (see page 8)
Automatically
Manually (see page 12)
You can store up to 80 stations.
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
Language
Install
User Set
Auto Power Off
Screen Messages
2
Press the corresponding
the Install option.
❿
3
Press the OK or to select this option.
Result: The Install menu is displayed.
Auto Setup
Manual Setup
4
Press the corresponding
Auto Setup is selected.
And then press the OK or
❿
.
: English
: Off
: On
,
buttons to select
❷
Install
or
buttons, until the
❷
❿
to select this option.
5
Press OK to start the auto scanning.
Result: The Please Wait indication highlight on
the television screen.
The first frequency band is scanned and
the first station found is displayed and
stored.
The STB-DVD-VCR then searches for the
second station and so on.
When the automatic scanning procedure
has finished, the STB-DVD-VCR switches
automatically to programme 1.
The number of stations automatically stored by
the STB-DVD-VCR depends on the number of
stations found.
6
If you wish to cancel the auto scanning before the
end, press the MENU button to exit the menu.
Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception
and delete the ones no longer required (see page
13).
ENG-11
Auto Setup
Please Wait
15%