Stb Functions; Main Menu; Volume Control; Select Soundtrack - Samsung SV-DVD54T Instruction Manual

STB Function
Display Screen
Before you can view the television programme, you
must perform the installation.
Therefore you will see only menu images at first.
After the television channels have been
programmed, you will see the following
picture(banner) each time you switch channels:
Logical Channel Number
Signal Status Programme
Information
1. Press the INFO. key in view mode.
2. Select the channel by pressing the Numerical
0~9 keys or ,
❷
RADIO key to move to TV or Radio channel.
You will also see this picture each time you
change channels.
When you press the TV / RADIO key on the
Remote Control Unit, TV and Radio
programme are toggled.
Detailed programme information
1. Press the INFO. key twice while you are
viewing a programme.
First you will see the banner described above.
After the INFO. key is pressed in the second
time, detailed information for current
programme can be displyed on another banner,
if there is more information. When this
information is more than one page,
be used for page up and down.
This service depends on service provider.
The number of soundtrack
in current channel
keys and select the TV /
➛➛ ❿ ❿
can

Main Menu

After installing your antenna system and SV-DVD54T
with appropriate connectors.
1. Plug in the AC main power and switch on the
receiver.
2. Press the MENU key to bring up the main menu.
STB
The following on screen display will appear:
The sub menu topics will be displayed from 1 to 4.
For the sub-menus 1, 2 and 3 you need the PIN
Code.

Volume Control

To control the volume level :
➛ , ❿
1. Press the
2. Press the MUTE key to turn to silence mode.
3. Press the MUTE key again or
order to cancel the mute function.

Select Soundtrack

1. Press the ALT key to see the soundtrack list
2. Press the
ENG-41
STB
keys to adjust the volume level.
➛ , ❿
keys in
, and OK key to select one.
❷