Recording A Programme Immediately; Recording A Programme With Automatic Stop - Samsung SV-DVD54T Instruction Manual

Recording a Programme
Immediately
Before recording a programme, you must have preset
the corresponding station (unless you are recording via
an external video source). If you have not done so,
refer to pages 11.
1
Switch on the television.
2
To monitor the programme being recorded, select
the television channel reserved for use with your
STB-DVD-VCR (or the LINE input if used).
3
Insert the cassette on which the programme is to be
recorded, with the window visible and the safety tab
intact or the opening covered with adhesive tape.
4
Select:
The station to be recorded using the PROG
( or ) buttons and SELECT (VCR or STB)
buttons or
The LINE1, LINE2 source using the INPUT
SEL. button for external video source
Result: The station number is displayed and the
programme can be seen on the
television.
5
Select the recording speed by pressing the SPEED
button as many times as required (see page 17).
6
Hold the REC button ( ) down for a while to start
recording.
Result: The record indicator appears on the
television and STB-DVD-VCR display. An
index is recorded on the tape (see page
24).
7
To stop recording, press
If your STB-DVD-VCR ejects the cassette
when you start recording, check to make sure
that the cassette's safety tab is intact or that
the opening (created by a broken safety tab) is
covered with adhesive tape.
If you reach the end of the tape while
recording, the cassette rewinds automatically.
If STB view changes to VCR view during
recording, the change of channel is impossible.
VCR function key is not operated for Play, FF,
REW on STB view.
once.
ENG-18
Recording a Programme with
Automatic Stop
This function enables you to record up to nine hours
(LP) of programmes.
Your STB-DVD-VCR stops automatically after the
requested length of time.
1
Switch on the television.
2
To monitor the programme being recorded, select
the television channel reserved for use with your
STB-DVD-VCR (or the LINE input if used).
3
Insert the cassette on which the programme is to
be recorded, with the window visible and the safety
tab intact or the opening covered with adhesive tape.
4
Select:
The station to be recorded using the PROG
( or ) buttons and SELECT (VCR or STB)
buttons or
The LINE1, LINE2 source using the INPUT
SEL. button for external video source
Result: The channel number is displayed and the
programme can be seen on the television.
5
Select the recording speed by pressing the SPEED
button as many times as required (see page 17).
6
Hold the REC button ( ) down for a while to start
recording.
Result: The record indicator appears on the
television screen and STB-DVD-VCR
display. An index is recorded on the tape
7
Press the REC button ( ) several times to increase
the recording time in:
30-minute intervals up to four hours
1-hour intervals up to nine hours
Result: The length is displayed on the television
displays. The selected programme is
recorded for the length of time requested.
At the end of that time, the STB-DVD-VCR
stops recording automatically and power off.
8
If you wish to cancel the recording before the end,
press STANDBY/ON.
If the end of the tape is reached while recording:
The recording stops and power off.
This function is not available in DVD recording
LENGTH 2:30
SET LENGTH :
PRESS REC