Setting Up The Display Options - Samsung SV-DVD54T Instruction Manual

Setting Up the Display Options

1 With the unit in Stop mode, press the MENU button.
2 Select DVD using ,
❷
button.
Setup
Setup
Display Setup
Setup
STB
3 Select Display Setup using
❿
press the OK or button.
4 Use the , buttons to select the desired item.
❷
❿
Then press the OK or
TV Aspect
Black Level
NTSC Disc Output
DVD/STB
TV Aspect
Depending on the type of television you have, you
may want to adjust the screen setting (aspect ratio).
1. 4:3 Letter Box : Select when you want to see
the total 16:9 ratio screen DVD
supplies, even though you have
a TV with a 4:3 ratio screen.
Black bars will appear at the top
and bottom of the screen.
❿
buttons, then OK or
:
, buttons, then
❷
button.
Display Setup
: 4:3 L-Box
: PAL 60 Hz
: Component
2. 4:3 Pan Scan :
3. 16:9 Wide :
Black Level
Adjusts the brightness of the screen.(On/Off)
NTSC Disc Output
"NTSC" if the screen only has one NTSC-video
entrance. If this is not the case, you can choose
to leave " PAL 60Hz" as is.
DVD/STB Out
Component : Sends Component signal from the
RCA JACK.
S-Video : Sends S-VIDEO signal from the AV
JACK (S-Video terminal).
Video : Sends COMPOSITE VIDEO signal
from the RCA JACK
ENG-31
Select this for conventional size
TVs when you want to see the
central portion of the 16:9
screen. (Extreme left and right
side of movie picture will be cut
off.)
You can view the full 16:9
picture on your widescreen TV.