Selecting The Cassette Type; Repeat Play; Selecting The Recording Speed; Protecting A Recorded Cassette - Samsung DVD-V6700 User Manual

Selecting the Cassette Type

If you wish to use the tape counter to display the
time remaining on a cassette, you must indicate
the type of cassette inserted.
1
Press the MENU button, then press the œ or
ƒ button to select VCR.
2
Press the OK or ‹ button.
The Tape Select is highlighted.
Tape Select
SETUP

Repeat Play

DVD
VCR
PROG
FUNC
3
Press the OK or ‹ button to select the
correct cassette length.
➝ E180 ➝ E240 ➝ E260 ➝ E300
• Press the MENU button to exit the menu.
Repeat Play
You can set repeat play to repeat the tape
continously from beginning to end.
1
Press the MENU button, then press the œ or
ƒ button to select VCR.
2
Press the OK or ‹ button, then press the
œorƒ button to select Repeat Play.
Press the OK or ‹ button to select On or Off.
Tape Select
SETUP
Repeat Play
DVD
VCR
PROG
FUNC
• On: Repeat play.
• Off: Do not wish to repeat play.
VCR Setup
‹ ‹
: E180
‹ ‹
: Off
VCR Setup
‹ ‹
: E180
‹ ‹
: Off

Selecting the Recording Speed

You can record a cassette at two different
speeds:
• SP (Standard Play)
• LP (Long Play)
In Long Play modes:
• Each cassette lasts twice as long
• The recording is of a slightly lower quality
1
Press the SPEED button to select SP or LP.
• The selected record speed will appear on
the front panel display.
Type Recording Time (in SP)
E180 180 mins. or 3 hours
E240 240 mins. or 4 hours
E260 260 mins. or 4 hours and 20 mins.
E300 300 mins. or 5 hours

Protecting a Recorded Cassette

Video cassettes have a safety tab to prevent
accidental erasure. When this tab has been
removed, you cannot record on the tape.
1
If you wish to protect a cassette, break off the
tab using a small screwdriver.
2
To re-record over a protected cassette (safety
tab broken), cover the hole with adhesive
tape.
English - 23