Setting The Stb-Dvd-Vcr Output Channel; Selecting The Colour Mode - Samsung SV-DVD54T Instruction Manual

Setting the STB-DVD-VCR Output
Channel
Your STB-DVD-VCR output channel may need to be
changed if the pictures suffer from interference or if
your TV cannot find the pictures.
Also, you can change the STB-DVD-VCR output
channel to adjust the frequency in which information is
displayed on the screen.
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
2
Press the corresponding
the Install option.
❿
3
Press the OK or to select this option.
Result: The Install menu is displayed.
Auto Setup
Manual Setup
4 or
Press the buttons, until the VCR Output
❷
CH option is selected.
5
Select the required output channel (CH28~CH69)
by pressing the OK or
CH28 .. CH38
6
On completion, press RETURN to exit the menu.
Then tune your television again (see page 9).
❿
.
,
buttons to select
❷
Install
CH 28
:
CH 38
38
:
CH 69
❿
buttons
.. CH69

Selecting the Colour Mode

Before recording or playing back a cassette, you can
select the required system standard.
Otherwise, the system automatically selects the
reception standard when you select AUTO.
When playing back a cassette, the standard is
automatically selected by the STB-DVD-VCR.
When you playback an NTSC-recorded tape on
this STB-DVD-VCR make a setting on the
colour system according to your TV.
If your TV is Multi System TV (NTSC 4.43
compatible), set NT4.43 and you can record
NT4.43.
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
2
Press the corresponding
the User Set option.
3
Press the OK or
Result: The User Set menu is displayed.
Colour System
IPC
G-Code Extend
4
Press the corresponding
Colour System option is selected.
5
Press the OK or
Auto PAL
Auto When playing back a cassette, the system
standard is automatically selected by the
STB-DVD-VCR.
B/W Black and White
6
On completion, press RETURN three time to exit
the menu.
ENG-14
❿
,
buttons to select
❷
❿
to select this option.
User Set
Auto
: Auto
PAL
: On
MESECAM
: Off
B/W
or
buttons, until the
❷
❿
button to select
MESECAM B/W.
.