Table of Contents
Advertisement
Setting the Menu Language
1
OK
GB
Language
: English
Install
User Set
Auto Power Off
: Off
Screen Messages
: On
Language Set
English
Français
Deutsch
Español
Italiano
Nederlands
18
1
Open "MENU"
After pressing the MENU, press the OK or ❿ .
2
Select "Language"
Use the
or
buttons to highlight
❷
"Language," then press the OK or ❿ .
3
Set menu Language
Place the selection arrow next to your desired Language, then
press the OK button.
4
Press the
or
buttons to select language you want.
❷
Place the selection arrow next to your desired Language, then
press the OK button.
5
On completion, press RETURN to exit the menu.
Presetting the Stations Automatically
☛
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on page 14).
Your DVD-VCR contains a built-in tuner used to receive
television broadcasts.
You must preset the stations received through the tuner. This can
be done:
N Plug & Auto Set up (see page 13)
N Automatically
N Manually (see page 20)
You can store up to 80 stations.
1
After pressing the MENU, press the OK or ❿ .
Result:
The Setup menu is displayed.
2
Press the corresponding
,
buttons to select the
❷
option.
3
Press the OK or ❿ to select this option.
Result:
The
menu is displayed.
Install
4
Press the corresponding
or
buttons, until the
❷
Setup
is selected.
And then press the OK or ❿ to select this option.
Result:
A message appears, indicating that any channels
already preset on your DVD-VCR will be deleted.
5
Press OK button.
Result:
A message appears, indicating that any channels
already preset on your VCR will be deleted.
6
Press OK to start the auto scanning.
Result:
N
The
Please Wait
indication highlight on the
television screen.
N
The first frequency band is scanned and the first
station found is displayed and stored.
N
The DVD-VCR then searches for the second
station and so on.
N
When the automatic scanning procedure has
finished, the DVD-VCR switches automatically to
programme 1.
➢
The number of stations automatically stored by the DVD-
VCR depends on the number of stations that it has found.
7
If you wish to cancel the auto scanning before the end, press the
MENU button to exit the menu.
➢
N Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception and
delete the ones no longer required (see page 21).
VCR
Language
: English
Install
User Set
Auto Power Off
: Off
Screen Messages
: On
Auto Setup
Manual Setup
TV System
: G
Install
VCR Output CH
: CH 36
Auto
Auto Setup
Your date will be lost
Press OK to continue
Menu
to exit
Auto Setup
Please Wait
15%
GB
Install
19
Advertisement
Table of Contents
