Runco Video Xtreme VX-44d Installation & Operation Manual page 23

1. RS232 IN
Connect the RS-232 output from the DHD Controller here, using the provided
RJ11-to-DB9 adapter and communication cable.
2. RS232 OUT
Not used.
3. RS422
Not used.
4. GPIO
Not used.
5. REMOTE
Wired input from an external remote control or infrared receiver.
6. ETHERNET
Reserved for future use.
7. INPUT 3 (Video) / INPUT 4 (S-Video)
Not used. Connect all video sources to the DHD Controller.
8. INPUT 2 (DVI)
HDCP-compliant digital video input. Connect the HDMI output from the DHD
Controller to this input.
9. INPUT 1 (RGBHV)
Not used. Connect all video sources to the DHD Controller.
10. INPUT 5 (Option 1)
Reserved for future use.
11. INPUT 6 (Option 2)
Reserved for future use.
Runco VX-44d/-55d Installation/Operation Manual 7
Controls and Functions