iRobot Roomba Customer Support Booklet page 9

Roomba Customer Support Booklet
Does the Filter need to be cleaned?
Yes. The Air Filter should be brushed off as necessary while emptying the
Particle Bin after every use. If desired, the Filter may be washed by hand with
soap and water. It must be thoroughly dried before use.
I lost track my Roomba while it was cleaning, and now I can't find it. Could
it be in a different room?
Listen for the beeping sound that Roomba makes when it is finished cleaning. It
is unlikely that Roomba has wandered too far. Check i n the nearby room(s)
under furniture. In the future you may want to use a Virtual Wall Unit to confine
Roomba to one area.
Roomba becomes wedged or pinned, and stops.
Carefully remove Roomba from the wedged area. Once unwedged, place it back
on the floor in the center of the room to be cleaned, press the flashing Room Size
Button to "unpause" Roomba and get back to its cleaning cycle. To prevent
further wedgings, place the Virtual Wall Unit to beam in front of the wedge area,
so Roomba will steer clear. Or, try blocking the area where Roomba gets wedged
with something in your home.
The one-page "Roomba Care Hints" that came with your Roomba (also available
in the Owner's Manual), features additional tips to keep Roomba from getting
stuck and making your home "Roomba-friendly."
Roomba picked up fluids.
Roomba is not designed to pick up liquids of any kind. If it does accidentally run
through a puddle and pick up fluids, do the following:
1. Turn Roomba off. Remove the Particle Bin carefully. Remove the Filter
Door. Clean and dry all parts thoroughly.
2. Remove and clean the Main Brushes.
3. Wipe off the Brushes and the inside of the machine with a soft absorbent
cloth. Wipe both Brushes well. Allow to dry thoroughly before
reassembling.
4. Reinstall the Brushes.
Roomba repositioned an object to block an exit path.
Every room needs a little bit of preparation to make it ready for Roomba. Before
starting Roomba, please walk around the room and lift up objects that could
tangle Roomba, or that Roomba could push around.
I don't know how to stop Roomba once it's started cleaning.
To stop Roomba, pick it up by its handle or press the S, M, or L room size button.
Roomba was broken when I took it out of the box.
In general, if the unit is broken out of the box (smashed), the unit should be
exchanged at the place of purchase.
Can't find the answer to your support question? Call Roomba Customer Support at 1-877-855-8593 or email us at
roomba-support@irobot.com
9