Working With The Virtual Wall Unit - iRobot Roomba Customer Support Booklet

Roomba Customer Support Booklet
Some warmth is normal during charging. If it is really hot to the touch
(uncomfortable to touch) unplug it and contact Customer Service immediately.
Will the Battery Pack be harmed if it left charging for more than 12 hours?
No, the Charger turns off automatically after 12 hours of use.

Working with the Virtual Wall Unit

Operating the Virtual Wall Unit
1. Press the Virtual Wall Unit's Power Button to turn the unit on. The Power
Light will illuminate.
2. Move the Range Selector Switch to the room opening size you are
blocking. The range numbers shown are in feet. The three settings are 0-
3, 4-7, and 8+ feet. For the strongest setting you can block door openings
up to 13+ feet wide.
3. Place the Virtual Wall Unit on the floor at either edge of the doorway or by
the wall. Make sure that the Unit's Beam Emitter points across the opening
to insure Roomba does not cross the invisible beam. (The Beam Emitter is
located at the front of the Unit on a vertical surface. It's not located on the
top surface of the Unit.)
4. The Virtual Wall Unit automatically turns off after an hour or you can press
the Power Button again to turn off.
Operating the Virtual Wall Unit's Range Selector Switch.
If the room opening you are trying to block is less than 13 feet wide, move the
Range Selector Switch on the Virtual Wall Unit to the numbers that correspond to
the room opening size, in feet, that you are blocking. If the room opening is
greater than 13 feet, you may need to use an additional Virtual Wall Unit to span
that opening.
Placement of the Virtual Wall Unit
Place the Virtual Wall Unit on the floor at either edge of the doorway or by the
wall. Make sure that the Unit's Beam Emitter points across the opening to insure
Roomba does not cross the invisible beam. (The Beam Emitter is located at the
front of the Unit on a vertical surface. It's not located on the top surface of the
Unit.)
Can't find the answer to your support question? Call Roomba Customer Support at 1-877-855-8593 or email us at
roomba-support@irobot.com
19