Recording Video; Recording Audio (Digital Sources) - Kenwood KRF-V7030D Instruction Manual

Recording video

1 Use the INPUT SELECTOR to select the video source (other than
"VIDEO1") you want to record.
2 Set the video deck connected to VIDEO 1 to record.
• Select the REC MODE to record a digital input source.
3 Start playback, then start recording.
• With certain video software, recording may not be normal due to the
copy guard condition.

Recording audio (digital sources)

Switch on the REC MODE to record a digital input source.
Usually use the A-REC MODE to record audio input sources.
When the digital mode changes during recording in the A- REC MODE, the
audio may be interrupted momentarily. To record the audio from the
beginning of the digital mode change, use the M-REC MODE.
With a model that is not compatible with DTS, no audio is reproduced even
when the DTS signals are input.
Recording music in A-REC MODE
DIMMER
1 Use the INPUT SELECTOR to select the source (CD, DVD,
VIDEO2, or VIDEO3) you want to record.
2 Set the cassette deck to record.
3 Press and hold the DIMMER key for more than 2 seconds to
select the A-REC MODE.
• The mode changes every 2 seconds as shown below.
1REC MODE off :
2A-REC MODE :
3M-REC MODE :
4 Start playback, then start recording.
• If the audio reproduction stops in the middle due to change in the
input signals, etc., press the DIMMER key.
•
INPUT SELECTOR
The digital input record mode is
switched off.
The digital input signals (DTS,
Dolby Digital, or PCM) are identi-
fied automatically and converted
into stereo signals that are ready
for recording.
The input signal type at the mo-
ment this mode is selected is held
throughout this mode.
FM AUTO SOUND DIGITAL
AM PRO LOGIC S.DIRECT
MHz 3 STEREO MONITOR
TUNED
kHz DOWN MIX DSP
FM AUTO SOUND DIGITAL
AM PRO LOGIC S.DIRECT
MHz 3 STEREO MONITOR
TUNED
kHz DOWN MIX DSP
Recording music in M-REC MODE
1 Use the input selector to select the source (CD, DVD,VIDEO2, or
VIDEO3) you want to record.
2 Set the cassette deck to record.
3 Play the source to be recorded.
4 Press and hold the DIMMER key for more than 2 seconds to
select the M-REC MODE.
• The mode changes every 2 seconds as shown below.
1REC MODE off :
2A-REC MODE :
3M-REC MODE :
5 Play the source from the beginning and start recording.
• If the audio reproduction stops in the middle due to change in the
input signals, etc., press the DIMMER key.
AUTO
MEMO
ST.
AUTO
MEMO
ST.
Recording
DIMMER
INPUT SELECTOR
The digital input record mode is
switched off.
The digital input signals (DTS,
Dolby Digital or PCM) are identi-
fied automatically and converted
into stereo signals that are ready
for recording.
The input signal type at the mo-
ment this mode is selected is held
throughout this mode.
FM AUTO SOUND
AM PRO LOGIC
MHz 3 STEREO
kHz DOWN MIX
FM AUTO SOUND
AM PRO LOGIC
MHz 3 STEREO
kHz DOWN MIX
19
DIGITAL AUTO
S.DIRECT MEMO
MONITOR ST.
DSP TUNED
DIGITAL AUTO
S.DIRECT MEMO
MONITOR ST.
TUNED
DSP