Connecting To The Aux In Jacks (Krf-V7030 Only); Connecting The Antennas - Kenwood KRF-V7030D Instruction Manual

Connecting to the AUX IN jacks
only)
The AUX IN jacks are convenient for connection of video components
such as a camcorders and video games.
S VIDEO
S VIDEO cord
Camcorder, other VCR,
video game, digital camera,
S VIDEO OUT
or portable MD player
• To select the source connected to the AUX IN jacks, select AV
AUX by using the INPUT SELECTOR knob.
• When you connect the audio source such as the MD player, you
do not need to connect the video cable.
• When you connect the unit and the component with the S
VIDEO cord, you can get better picture quality.
(KRF-V7030D
V AV AUX L – AUDIO – R
VIDEO OUT
AUDIO OUT
&

Connecting the antennas

AM loop antenna
The supplied loop antenna is for use indoors. Place it as far as possible from
the receiver, TV set, speaker cords and power cord, and adjust the direction
for best reception.
AM antenna terminal connections
1 Push lever. 2 Insert cord.
FM indoor antenna
The supplied indoor antenna is for temporary use only. For stable signal
reception we recommend using an outdoor antenna. Disconnect the indoor
antenna when you connect one outdoors.
FM outdoor antenna
Lead the 75 coaxial cable connected to the FM outdoor antenna into the
room and connect it to the FM 75
FM antenna terminal connections
Insert cord.
AM
GND
FM
75
Use an antenna
adaptor
(Commercially
available)
Setting up the system
3 Return lever.
terminal.
Attatch to the stand.
AM loop antenna
FM indoor antenna
FM outdoor antenna
11