Connecting The Speakers - Kenwood KRF-V7030D Instruction Manual

Connecting the speakers

1 Strip coating.
3 Insert.
Front Speakers A
Right
Left
Center
Speaker
FRONT SPEAKERS CENTER SPEAKERS
(8 – 16 ) (8 – 16 )
RED BLUE GREEN
+
–
KRF-V7030D/V6030D
SUB WOOFER PRE OUT
Use the FRONT
SPEAKERS B
terminals if you
want to connect a
second front
speaker system
(except for KRF-
V5030D/V4530D).
Powered
subwoofer
2 Loosen.
4 Secure.
The KRF-V5030D/
V4530D are equipped
with one-touch speaker
terminals.
They are arranged in the
same manner as the
speaker terminals of the
KRF-V7030D/V6030D.
Refer to the instructions
on making connections
to the KRF-V7030D/
V6030D when making
connections to the KRF-
V5030D/V4530D.
L C
R
+
-
FRONT CENTER
SPEAKERS SPEAKER
KRF-V5030D/V4530D
FRONT SPEAKERS
(8 – 16 )
+ – – +
(8 – 16 )
ORANGE SURROUND SPEAKERS GRAY
Left
Right
Surround Speakers
(Be sure to connect both
surround speakers)
1 Strip coating.
3 Insert the cord.
• Never short circuit the + and – speaker cords.
• If the left and right speakers are connected inversely or the speaker
cords are connected with reversed polarity, the sound will be unnatu-
ral with ambiguous acoustic imaging. Be sure to connect the speak-
ers correctly.
Speaker impedance
After confirming the speaker impedance indications printed on the rear
panel of the receiver, connect speakers with matching impedance
ratings. Using speakers with a rated impedance other than that indi-
cated on the rear panel of the receiver could result in malfunctions or
damage to the speakers or receiver.
Setting up the system
2 Push the lever.
4 Return the lever.
13