Download
Share
Print this page
Kenwood KRF-V5030D Instruction Manual
  1. Manuals
  2. Brands
  3. Kenwood Manuals
  4. Receiver
  5. KRF-V5030D
  6. Instruction manual
Kenwood KRF-V5030D Instruction Manual

Kenwood KRF-V5030D Instruction Manual

Audio video surround reciver
Hide thumbs Also See for KRF-V5030D:

Advertisement

Quick Links

Download this manual
AUDIO VIDEO SURROUND RECEIVER
KRF-V7030D
KRF-V6030D
KRF-V5030D
KRF-V4530D
INSTRUCTION MANUAL
KENWOOD CORPORATION
This instruction manual is used to describe multiple models listed above.
Model availability and features (functions) may differ depending on the country and
sales area.
About the supplied remote control (RC-R0610)...
Compared to standard remote controls, the remote control supplied with this receiver has several operation
modes. These modes enable the remote control to control other audio/video components. In order to
effectively use the remote control it is important to read the operating instructions and obtain a proper
understanding of the remote control and how to switch its operation modes (etc.).
Using the remote control without completely understanding its design and how to switch the operation modes
may result in incorrect operations.
B60-4602-00 02 MA (E2, T)
9909

Advertisement

loading
Need help?

Need help?

Do you have a question about the KRF-V5030D and is the answer not in the manual?

Questions and answers

michael Wilsher
February 15, 2025

5030d when i turn on the power the i/o light is solid with no display. if i press the i/o button it flashes and the display comes on for a second, then a relay clicks and the display goes out

0
1 comments:
Mr. Anderson
February 15, 2025

If the Kenwood KRF-V5030D has a solid I/O light but no display when powered on, possible issues include:

1. Power Supply Problem – The unit may not be receiving proper voltage due to a faulty power supply or internal fuse issue.
2. Display Malfunction – The display panel may be defective or disconnected internally.
3. Standby Mode – The receiver might be stuck in standby mode; try pressing the ON/STANDBY button.
4. Internal Component Failure – Faulty capacitors or other internal components could prevent the display from functioning while the power remains on.

Checking the power connections, ensuring the unit is not in standby, and inspecting for internal damage may help diagnose the issue.

This answer is automatically generated

0

Subscribe to Our Youtube Channel

Related Manuals for Kenwood KRF-V5030D

Summary of Contents for Kenwood KRF-V5030D

  • Page 1 AUDIO VIDEO SURROUND RECEIVER KRF-V7030D KRF-V6030D KRF-V5030D KRF-V4530D INSTRUCTION MANUAL KENWOOD CORPORATION This instruction manual is used to describe multiple models listed above. Model availability and features (functions) may differ depending on the country and sales area. About the supplied remote control (RC-R0610)...
  • Page 2 Remote control unit (1) Batteries (R6/AA) (2) Blue : Neutral RC-R0610 Brown : Live Do not connect those leads to the earth terminal of a three-pin plug. For KRF-V5030D and KRF-V4530D Remote control unit (1) Batteries (R6/AA) (2) RC-R0510 Safety precautions Microcomputer malfunction WARNING :...
  • Page 3 Before applying the power Contents Maintenance of the unit When the front panel or case becomes dirty, wipe with a soft, dry Caution : Read the pages marked   carefully to ensure safe cloth. Do not use thinner, benzine, alcohol, etc. for these agents may operation. cause discoloration. Before applying the power ....2 Safety precautions ..........
  • Page 4 How to use this manual Special features True home theater sound The manual covers the KRF-V7030D, KRF-V6030D, KRF-V5030D, and KRF-V4530D. Items such as functions, number of jacks, and remote This receiver incorporates a wide variety of surround modes to bring you control details differ somewhat between these models.
  • Page 5 TUNED indicator DOWN MIX indicator RDS indicators MONITOR indicator Speaker selection indicators Input channel indicators 3 STEREO indicator Output channel indicators Display STEREO indicator For KRF-V6030D, KRF-V5030D, KRF-V4530D MULTI CONTROL DOLBY DIGITAL PROLOGIC 3 STEREO VOLUME CONTROL DOLBY STANDBY MULTI CONTROL...
  • Page 6 Names and functions of parts Remote control unit (RC-R0610) (KRF-V7030D/V6030D) POWER POWER VCR/CDR RETURN LSTN.M DISPLAY MENU SET UP SOUND P.CALL P.CALL MULTI CONTROL TUNING ENTER BAND A/B+100 AUTO & B.BOOST DISC SKIP RECEIVER TITLE There are some cases in which keys (or knobs) INPUT SEL. that have the same function on the receiver and PHONO CD/DVD TUNER MD/TAPE...
  • Page 7 Remote control unit (RC-R0510) (KRF-V5030D/V4530D) DVD player operation Press the DVD POWER key on the remote control for more than 2 seconds to turn on the connected KENWOOD DVD player. Press the DVD POWER POWER key again to activate the DVD player operation mode.
  • Page 8 Setting up the system Connecting audio components Make connections as shown below. When connecting the related system components, be sure to also refer to the instruction manuals supplied with the components you are Shape of AC outlets connecting. Do not connect the power cord to a wall outlet until all connections are completed. U. K. DTS disclaimer clause Other countries SYSTEM CONTROL DTS Digital Surround™ is a discrete 5.1 channel digital audio format jacks available on CD, LD, and DVD software which consequently cannot be decoded and played back inside most CD, LD, or DVD players.
  • Page 9 Setting up the system Connecting video components Connecting a DVD player (6-channel input) If you have connected a DVD player to the receiver with digital connection, be sure to read the “Input mode settings” section on the following page S Video jacks carefully.
  • Page 10 Dolby Digital source signal depending on the combination of listening mode and source signal. To connect an LD player with a DIGITAL RF OUT, connect the LD player to the KENWOOD RF digital demodulator (DEM-9991D). Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of the receiver. Connect  the  video  signal  and  analog  audio  signals  to  the  VIDEO2  or...
  • Page 11 Setting up the system Connecting to the AUX IN jacks Connecting the antennas (KRF-V7030D only) AM loop antenna The supplied loop antenna is for use indoors. Place it as far as possible from The AUX IN jacks are convenient for connection of video components the receiver, TV set, speaker cords and power cord, and adjust the direction such as a camcorders and video games.
  • Page 12 • Once you finish making the system connections, be sure to register the appropriate setup code for each component. • If you own remote controllable KENWOOD audio components that are [SL16] Receiver not compatible with system control, registering the setup code en- SYSTEM Cassette deck...
  • Page 13 4 Return the lever. • Never short circuit the + and – speaker cords. Front Speakers A • If the left and right speakers are connected inversely or the speaker The KRF-V5030D/ cords are connected with reversed polarity, the sound will be unnatu- Right Left V4530D are equipped ral with ambiguous acoustic imaging.
  • Page 14 Setting up the system Preparing the remote control Speaker placement Loading the batteries 2 Insert the batteries. 1 Remove the cover. Center speaker Subwoofer 3 Close the cover. Front speaker Listening position Surround speaker Front speakers : Place to the front left and right of the listening position. Front speakers are required for all surround modes.
  • Page 15 Preparing for surround sound Speaker settings 6 Use the MULTI CONTROL to select the appropriate center speaker setting. To enable you to obtain optimum enjoyment from the receiver’s listening If you selected ﾒLRGﾓ as the front speakers setting. modes, make sure to complete the speaker settings (subwoofer, front, 1 CNTR LRG (large): A large center speaker is connected to center, and surround speakers) as described below.
  • Page 16 • To return to the original indication, repeat the above procedure. the speakers have been correctly selected. • You also will need to change the name input to the remote control to “MD”. Selecting the speaker system (except for KRF-V5030D/ V4530D) Input level adjustment (analog sources only) Press the SPEAKERS A or B key to select the speaker system to be used.
  • Page 17 Normal playback Listening to a source component Adjusting the sound VOLUME CONTROL MULTI CONTROL INPUT SELECTOR SOURCE DIRECT KRF-V6030D/ V5030D/ SOUND V4530D SPEAKERS A/B VOLUME CONTROL PHONES SOUND SOUND INPUT INPUT MULTI MULTI CONTROL CONTROL SELECTOR SELECTOR B.BOOST BASS BOOST VOLUME VOLUME MUTE...
  • Page 18 MEMO STEREO MONITOR TUNED DOWN MIX Listening with headphones 2 Use the INPUT SELECTOR knob to select a source other than ﾒMD/ 1 (KRF-V7030D/V6030D) TAPE.ﾓ Press the SPEAKERS A or B key so that the speaker indicator goes off. 3 Start playback on the cassette deck connected to the MONITOR jacks and (KRF-V5030D/V4530D) start recording on the cassette deck connected to the MD/TAPE jacks. Press the SPEAKER key so that the speaker indicator goes off. Make sure the SPEAKERS Make sure the SP indicators MD/TAPE = MONITOR recording indicators are turned off. are turned off. TI.VOL 1 Use the INPUT SELECTOR knob to select ﾒMD/TAPE.ﾓ...
  • Page 19 Recording Recording video Recording music in M-REC MODE 1 Use the INPUT SELECTOR to select the video source (other than ﾒVIDEO1 ﾓ) you want to record. DIMMER 2 Set the video deck connected to VIDEO 1 to record. • Select the REC MODE to record a digital input source. 3 Start playback, then start recording. • With certain video software, recording may not be normal due to the •...
  • Page 20 Listening to radio broadcasts Tuning (non-RDS) radio stations Using RDS (Radio Data System) Radio stations can be classified into RDS (Radio Data System) stations RDS is a system that transmits useful information (in the form of digital and other stations. To listen to or store RDS stations in the preset memory, data) for FM broadcasts along with the broadcast signal.
  • Page 21 Listening to radio broadcasts Using the DISPLAY key Presetting RDS stations (RDS AUTO MEMORY) This function automatically stores up to 40 RDS stations in the preset memory. In order to use the PTY function, the RDS stations must be stored in the preset memory using the RDS AUTO MEMORY function.
  • Page 22 Listening to radio broadcasts Presetting radio stations manually Enter the number of the preset you want to receive (up to The RDS auto memory function assigns preset numbers to RDS stations "40"). starting from preset number "1". Therefore, be sure to execute the RDS auto memory function before using the following operations to manually store AM stations and other FM stations, and RDS stations.
  • Page 23 Listening to radio broadcasts Tuning by program type (PTY search) This function lets you set the tuner to automatically search for stations Press the PTY key to start searching. which are currently broadcasting the type of program (genre) you want to listen to.
  • Page 24 Ambience effects This receiver is equipped with listening modes that allow you to enjoy Dolby Digital (AC-3) an enhanced sonic ambience with a variety of video sources. The Dolby Digital (AC-3) surround format lets you enjoy up to 5.1 In order to obtain the optimum effect from the surround modes, make channels of digital surround sound from Dolby Digital (AC-3) program sure to input the proper speaker settings beforehand. sources (such as Laserdisc or DVD software marked ). Com- pared with previous Dolby surround, Dolby Digital (AC-3) provides even better sound quality, greater spatial accuracy, and improved dynamic range.
  • Page 25 Ambience effects Surround Play The DTS compatible models can reproduce a CD, DVD, or LD carrying Dolby 3 Stereo the DTS mark. (KRF-V7030D only) Dolby 3 Stereo is available for systems that do not have surround speakers. When in the Dolby 3 Stereo mode, the surround information DOLBY DIGITAL can be used when playing DVD or LD software bearing is redirected to the front left and right speakers.
  • Page 26 For the powered subwoofer, you can adjust the volume of the subwoofer using the subwoofer’s own volume control. • (KRF-V5030D/V4530D only) When you press the POWER (DVD) key and the DVD player does not turn on, press the 1 or 2 key during pressing the POWER (DVD) key.
  • Page 27 Ambience effects Convenient functions 2 Use the MULTI CONTROL to select the on or off setting. MULTI CONTROL KRF-V6030D/ AUTO SOUND DIGITAL AUTO TI.VOL PRO LOGIC S.DIRECT MEMO V5030D/ CLIP MUTE DIMMER STEREO MONITOR RDS EON V4530D TUNED DOWN MIX NEWS • The adjustment item is displayed for approximately 8 seconds. •...
  • Page 28 In case of difficulty Resetting the Microcomputer With the power cord plugged in, turn the POWER key OFF. Then, If the microcomputer may malfunction (unit cannot be operated, or shows an while holding down the ON/STANDBY key, press POWER. erroneous display) if the power cord is unplugged while the power is ON, or due to some other external factor. If this happens, execute the following procedure to reset the microcomputer and return the unit to its normal operating condition. • Please note that resetting the microcomputer will clear the contents of the memory and returns the unit to the state it was in when it left the factory.
  • Page 29 MONITOR IN (VIDEO2/MONITOR) ......200 mV / 47 kΩ Notes 1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed without notice. 2. The full performance may not be exhibited in an extremely cold location (under a water-freezing temperature).
  • Page 30 MEMO...
  • Page 31 MEMO...
  • Page 32 For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your dealer for information or service on this product.

This manual is also suitable for:

Krf-v6030dKrf-v7030dKrf-v4530dKrf-v5070dKrf-v4550d