JVC EXAD KW-AVX810 Instructions Manual page 43

Sound mode
(¢Ñ page 57)
Signal strength/Battery
remainder (only when
the information comes
from the device)
Status of the device
1 * Indicates the button pressed. It may be different from the operation status.
2 * This button appears when the Bluetooth Adapter is connected.
[
3
* You cannot select "NEW DEVICE" when a Bluetooth audio player is connected.
3 8 7
Press [SOURCE], then press [Bluetooth
AUDIO ( ]. ¢Ñ page 11)
• You can also use SOURCE on the monitor
panel. Press it repeatedly.
Ÿ
Start playback.
Bluetooth Information:
• See page 37 for connecting a new device.
• See page 38 for connecting/disconnecting a
registered device.
• See page 38 for deleting a registered device.
If you wish to receive more information about Bluetooth, visit the following JVC web site: <http://www.
jvc-victor.co.jp/english/car/>
EN_KW-AVX810[E]f.indb 43 EN_KW-AVX810[E]f.indb 43
2
] Starts playback/pauses
[4 ¢ ] Reverse/forward search
[5 • ‡ ] Selects the registered device
("NEW DEVICE" appears when a new device ) can be registered.*
[ ] Displays < Dial Menu
/ ] [
~
*
Using the Bluetooth audio player
Connected Device Name
*
> screen
You can use the following buttons on the remote
controller for the Bluetooth audio operations.
43
The Bluetooth icon
lights up when the
adapter is connected.
3
Starts and pause playback.
Reverse/forward skip
Adjusts the volume.
EXTERNAL DEVICES
1
08.1.25 7:46:01 PM 08.1.25 7:46:01 PM