Disc Operations; Caution On Volume Setting - JVC EXAD KW-AVX810 Instructions Manual

Disc operations

The disc type is automatically detected, then playback starts (for some discs, the top menu of the disc appears).
If a disc does not have any disc menu, all tracks on it will be played repeatedly until you change the source or eject
the disc.
If " " appears on the screen, the unit cannot accept the operation you have tried to do.
• In some cases, without showing "
<
> menu is displayed.
• By pressing and holding the button, you can
open the monitor panel and eject the disc.
When playing back a multi-channel encoded disc, the multi-channel signals are downmixed.
• You can fully enjoy multi-channel sound by connecting an amplifier or a decoder compatible with these multi-
channel sources. ( ¢ Ñ also page 75)
EN_KW-AVX810[E]f.indb 19 EN_KW-AVX810[E]f.indb 19
," operations will not be accepted.
~
Open the monitor panel.
Ÿ
! Insert a disc.
Label side
Monitor panel closes automatically.
If not, press [Close].
Caution:
Do not place your finger behind the monitor panel.

Caution on volume setting:

Discs produce very little noise compared with other
sources. Lower the volume before playing a disc
to avoid damaging the speakers by the sudden
increase of the output level.
19
Open/Tilt
OPERATIONS
08.1.25 7:45:48 PM 08.1.25 7:45:48 PM