Using The Bluetooth Cellular Phone; To Answer The Incoming Call; To End The Call - JVC EXAD KW-AVX810 Instructions Manual

Using the Bluetooth cellular phone

Sound mode
(¢Ñ page 57)
Status of the device
Signal strength/Battery
remainder (only when
the information comes
from the device)
1 * When a cellular phone with audio function is connected,
2
* This button appears when the Bluetooth Adapter is connected.
3 * This adjustment does not affect the volume level of the other sources.
Press [SOURCE], then press [Bluetooth PHONE].
Press [ ].
!
Press [Bluetooth].
/ Establish the connection with a device, then make a call (or settings using <Bluetooth>
menu (). ¢Ñ pages 67 and 68)
automatically.
Name and phone number (if acquired)
When <Auto Answer> is activated...
The unit answers the incoming call automatically.
(¢Ñ page 68)
EN_KW-AVX810[E]f.indb 39 EN_KW-AVX810[E]f.indb 39
page 41
¢Ñ
Connected Device Name
2
3
Adjust the volume of the incoming calls.*
("NEW DEVICE" appears when a new device can be registered.)
[ ]
Hold : Activates < Voice Dialing > function
[ ] Displays <Dial Menu > screen
[ ] Selects the registered device
~
(
5 • ‡
When a call comes in...
The source is changed to "Bluetooth PHONE"
39
1
appears.
* • You can also use SOURCE on the monitor pane
When <Auto Answer> is deactivated...

To answer the incoming call

• Press the message displayed on the touch panel.
• Press any button on the monitor panel (except
/ATT or VOL +/–).

To end the call

• Hold the message displayed on the touch panel.
• Hold any button on the monitor panel (except
/ATT or VOL +/–).
• You can adjust the microphone volume. ( ¢Ñ page 68)
EXTERNAL DEVICES
*
Bluetooth icon lights
up when the adapter
is connected.
Continued on the next page
08.1.25 7:45:58 PM 08.1.25 7:45:58 PM
¢Ñ page 1