Roberts SOUND66 Manual page 34

Equalizer function using the sound system
1. Press the On / Standby button to switch on your sound system.
2. Press and release the Menu button "EQ" will show on the display.
3. Press and release the Select button to enter the EQ setup menu.
4. Press the Tuning Up or Down buttons to cycle through the
various modes.
a. Flat - no tone modifi cation is applied
b. Jazz
c. Rock
d. Classic
e. Pop
f. News
g. Treble - tone setting may be adjusted
h. Bass - tone setting may be adjusted
Treble control
5. Press the Tuning Up or Down buttons to cycle through the modes
until "TREB" appears on the display. The current treble setting will be
shown on the display.
6. To adjust the treble setting press and release the Rewind or Fast-
forward buttons until the desired level is displayed.
7. If you wish also to adjust the bass, then press the Tuning Up or Down
buttons once more as described in step 8. Alternatively press the
Select button to revert to the play mode display.
33
2
3,7
4,5
4,5
6 6
7