Troubleshooting/Reset Button - Roberts R9940 Manual

3-band rds pll digital radio
Table of Contents

Advertisement

Troubleshooting/Reset button

If your radio fails to operate correctly, or some digits
on the display are missing or incomplete carry out
the following procedure.
1. Switch off the radio and remove the batteries.
2. With the aid of a suitable implement (the end of a
paper clip) press the reset button located in the
battery compartment for at least 5 seconds, this
will reset the microprocessor, clock time and clear
all stations stored in preset memory.
If a problem persists our technical staff would be
pleased to offer any assistance on operating the
radio. Our technical helpline number is: 020 8758
0338.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
23

Advertisement

Table of Contents
loading

Table of Contents