Mw (Am) Tuning Step Size - Roberts R9940 Manual

MW (AM) tuning step size

In Europe and other parts of the world MW tuning
steps are 9kHz, in America the MW tuning step size
is 10kHz.
To change the MW tuning step size from 9KHz to
10KHz proceed as follows:-
1. Switch on your radio and select the MW waveband.
2. Press and hold down the Display button until
the display shows 10 kHz.
3. Press the Display button to confirm the setting.
4. To change back to 9kHz steps - press and hold
down the Display button until the display shows
9 kHz.
5. Press the Display button to confirm the setting.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
13