Blindstitch - JUKI HZL-30Z Instruction Manual

All manuals and user guides at all-guides.com

Blindstitch

Blind stitching provides a durable way to finish a hem and is
presented as an instantly selectable pattern as a convenience.
It takes practice, however, so a test sample is suggested.
1.
Overcast the fabric,
and fold the edge.
1. Fold the fabric and then baste it.
0.5~0.6 cm
Fabric
Finished
(wrong
hem
side)
Basting
2. Fold the fabric at
the basting stitch seam.
Fabric
(wrong
side)
3.
Fabric
(wrong
side)
Refer to page 16 for overcasting.
5.
Turn the fabric over.
Fabric Fabric
(wrong side) (right side)
Finished hem
After sewing the seam, turn the
fabric over.
CAUTION:
Make sure to turn off the machine before changing the presser foot.
2.
Select the blindhem
stitch pattern.
HZL-30Z
For
elastic
fabric
stitch
HZL-60
For
elastic
fabric
stitch
* Set the stitch length.
HZL-
30Z
:2~4 :1.5~3
HZL-
60
How to adjust stitch width
If the stitches fail to reach the folded edge:
HZL-30Z
If the stitches reach too far beyond the folded edge:
HZL-30Z
3. 4.
Change the presser
foot. edge against the guide.
HZL-30Z
Fabric
(wrong
side)
Blindstitch presser foot (D)
Place the folded edge
HZL-60
against the presser foot
guide, and sew the fabric.
Blindstitch presser foot (D)
HZL-60
HZL-60
Position the folded
Guide
Turn the screw
toward you.
This will move the
guide to the right.
Place the foded
edge sungly
against the reposi-
tioned guide.
Turn the screw
away from you.
This will move the
guide to the left.
Place the foded
edge sungly
against the reposi-
tioned guide.
20