Installation Of The Sewing Machine - JUKI LH-3500 Series Instruction Manual

3-2. Installation of the sewing machine

(1) Installing the under cover
3
1
1
22.5 mm
2
A
5
C
3
1
4
18.5 mm
3
B
) The under cover should rest on the four
corners of the machne table groove.
2) Fx two rubber seats 1 on sde A (operator'
s sde) usng nals 2 as llustrated above. Fx
two cushon seats 3 on sde B (hnged sde)
usng a rubber-based adhesve. Then place
under cover 4 on the fixed seats.
3) Remove ar vent cap 5 attached to the
machne bed. (Be sure to attach cap 5 when
transportng the machne head n the state
that the machne head s removed from the
machne table.)
If the sewing machine is operated without
removing air vent cap 5 , oil leakage from
gear box portion C may occur.
– 5 –