14. adjusting the presser foot lift
adjusting the presser foot lift
WarNING :
to protect against possible personal injury due to abrupt start of the machine, be sure to start the fol-
lowing work after turning the power off and ascertaining that the motor is at rest.
15. adjusting the micro-lifter
WarNING :
to protect against possible personal injury due to abrupt start of the machine, be sure to start the fol-
lowing work after turning the power off and ascertaining that the motor is at rest.
To adjust the heght of the presser foot, adjust the
heght of screw 1 so that the presser foot does not
come in contact with other components and fix the
presser foot wth nut 2 .
1
2
When the mcro-lfter collar 1 s turned clockwse
and counterclockwse, the presser bar lftng lever s
pressed down to lft the presser foot.
Adjust the heght of the mcro-lfter accordng to the
sewng condton.
1
– 23 –
In the case the micro-lifter is not used, use
the sewing machine with the marker line on
the micro-lifter collar faced straight up.