Installing The Belt Cover; Installing The Chain; Installing The Thread Guide - JUKI MF-7900 Instruction Manual

5. Installing the belt cover

WARNING :
Be sure to install the belt cover. If it is not installed, there is a danger of injury since hands or clothes
may be caught in the machine or a danger of damage of the machine since sewing products may be
caught in the machine.
❸

6. Installing the chain

❸
❷
❶

7. Installing the thread guide

❷
❶
❹
❶
❷
❹
❸
– 10 –
Install belt cover ❷ as shown in the illustration.
The setscrews ❶ are the fixation screws of belt cover
❷ .
* When installing the belt cover, use the cover with
part ❸ cut out.
* When the semi-submerged type table is used with
the machine, cover ❹ is not used.
1) Hang hook ❷ of chain ❶ to presser bar lifting lever
❸ .
2) Hook the other side of the chain ❶ to the pedal.
1) Install thread guide No. 1 ❶ supplied as accessories
on the machine arm with screws (black, screw shank
length 6 mm) ❷ .
2) Install thread guide ❸ on thread guide No. 1 ❶ with
screw (black, screw shank length 6 mm) ❹ .