Applique; Section Iv. Decorative Stitching; Scallop Stitch - Janome Sewing Machine Instruction Book

q w e
q
e
y
r
t
q w e

Applique

q Stitch pattern:
w Needle thread tension:
e Presser foot:
* The stitch width of pattern 31 – 33 can be changed
without changing its center needle position.
Place an applique on the fabric and baste or pin it in
place.
Reduce the foot pressure.
Sew while guiding the fabric so the needle falls along the
outer edge of the applique.
w
• To adjust the stitch width
Select pattern 31.
Press the cursor buttons
the stitch width value "3.5" e (default setting).
Press the
Press the
The stitch width will be varied based on the centered
needle drop position y.

SECTION IV. DECORATIVE STITCHING

Scallop Stitch

q Stitch pattern:
w Thread tension dial:
e Presser foot:
Sew the stitches approximately 3/8˝ (1 cm) inside the
edge of the fabric.
Trim the outside of the stitches as shown. Make sure
you don't cut the thread.
36
q Applique
w Outer edge
button to decrease the stitch width r.
button to increase the stitch width t.
e Stitch width (3.5)
r Stitch pattern 31 (stitch width decreased)
t Stitch pattern 31 (stitch width increased)
y Center needle drop position
31, 32 or 33
1 to 4
Satin stitch foot F
to move the cursor under
23
3 to 6
Zigzag foot A