Removing And Attaching The Foot Holder; Changing The Presser Foot; Presser Foot Lifter - Janome Sewing Machine Instruction Book

q
w
w
q
w
e
e
w
q
e
w
q

Removing and Attaching the Foot Holder

CAUTION:
Turn OFF the power switch before detaching or
attaching foot holder.
• Removing the foot holder
Remove the setscrew q by turning it counterclockwise
with a screwdriver.
• Attaching the foot holder
Match the hole in the foot holder w with the threaded
hole in the presser bar e. Fit the setscrew q into
the hole. Tighten the setscrew q by turning it clockwise
with a screwdriver.
q Setscrew
w Foot holder
e Presser bar

Changing the Presser Foot

CAUTION:
Turn OFF the power switch before changing the foot .
Always use the proper foot for the selected pattern.
The wrong foot can cause the needle to break.
• Attaching the presser foot
Insert the presser foot pin q into the slit w of the
presser holder and push the presser foot to lock it in
place.
q Pin
w Slit
• Removing the presser foot
Pull the foot in the direction of arrow to remove the
presser foot.

Presser Foot Lifter

The presser foot lifter q raises and lowers the presser
foot.
You can raise the foot about 1/4˝ (0.6 cm) higher than the
normal up position w for easy removal of the presser
foot, or to help you place thick material under the foot.
q Presser foot lifter
w Normal up position
e Highest position
8