Spot Block Position Number Decal
Application Instructions
I . Clean front face of Upright Guide Post.
2. Raise Weight Bar to highest position.
3. Position Spot Block at top position.
4. Remove backins on decal to exDose adhesive.
5. Apply decal starting at the bottom edge
of Spot Bock in the center of the post.
6. Remove top layer of decal and
smooth out. Avoid making creases.
7. Repeat for other side.
8. Use numbers on decal to position
Spot Blocks at same and correct height
for each exercise to be performed.
(sB 7-e-04)