Step 2: Install Memory Modules - Fujitsu GA-8SGXP-FS P4 Titan Series User Manual

Step 2: Install Memory Modules

Before installing the memory modules, adhere to the following warning:
1. When RAM LED is ON, do not install / remove DIMM from socket.
2. Please note that the DIMM module can only fit in one direction due to
the one notch. Wrong orientation will cause improper installation.
Please change the insert orientation.
The motherboard has 2 dual inline memory module (DIMM) sockets. The BIOS will automatically
detects memory type and size. To install the memory module, just push it vertically into the DIMM
socket. The DIMM memory module can only fit in one direction due to the notch. Memory size can
vary between sockets.
Support Unbuffered DDR DIMM Sizes type:
64 Mbit (2Mx8x4 banks)
128 Mbit (2Mx16x4 banks)
512 Mbit (16Mx8x4 banks)
GA-8SGXP-FS Motherboard
64 Mbit (1Mx16x4 banks)
256 Mbit (8Mx8x4 banks)
512 Mbit (8Mx16x4 banks)
- 14 -
Notch
DDR
128 Mbit (4Mx8x4 banks)
256 Mbit (4Mx16x4 banks)