Fujitsu GA-8SGXP-FS P4 Titan Series User Manual page 28

16) S_IRQ
This connector is for special design, for example: PCMCIA add on card.
17) CLR_CMOS (Clear CMOS)
You may clear the CMOS data to its default values by this jumper. To clear CMOS, temporarily
shor 1-2 pin. Default doesn't include the "Shunter" to prevent from improper use this jumper.
GA-8SGXP-FS Motherboard
Pin No.
1
Open: Normal
1
1
1-2 Close: Clear CMOS
- 28 -
Definition
1 GND
2 Signal