Advanced Bios Features - Fujitsu GA-8SGXP-FS P4 Titan Series User Manual

- - Extended Memory
The BIOS determines how much extended memory is present during the POST.
This is the amount of memory located above 1MB in the CPU's memory address map.

Advanced BIOS Features

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Hard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Boot Up Floppy Seek
Password Check
CPU Hyper-Threading*
Full Screen LOGO Show
Intel OnScreen Branding
Init Display First
: Move Enter:Select +/-/PU/PD: Value F10: Save ESC:Exit
F5: Previous Values
Hard Disk Boot Priority
Select boot device priority for onboard hard disk (or add-on cards).
Use < > or < > to select a device, then press <+> to move it up, or <-> to move it down the list.
Press <ESC> to exit this menu.
1. Bootable Add-in Cards
First / Second / Third Boot Device
Floppy
LS120
Hard Disk
CDROM
ZIP
USB-FDD
USB-ZIP
* This item will not be shown if you are using a CPU that doesn't support the "Hyper Threading Technology".
Advanced BIOS Features
F6: Fail-Safe Defaults
Figure 3: Advanced BIOS Features
Selet your boot device priority.
Select your boot device priority by Floppy.
Select your boot device priority by LS120.
Select your boot device priority by Hard Disk.
Select your boot device priority by CDROM.
Select your boot device priority by ZIP.
Select your boot device priority by USB-FDD.
Select your boot device priority by USB-ZIP.
- 37 -
[Press Enter]
Item Help
[CDROM]
Menu Level
[Floppy]
Select Hard Disk Boot
[Hard Disk]
Device Priority
[Disabled]
[Setup]
[Enabled]
[Enabled]
[Enabled]
[AGP]
F1: General Help
F7: Optimized Defaults
BIOS Setup