Install Memory Modules; Install The Cpu - Fujitsu PTM900 Manual

2). Install Memory Modules

1. Locate DDRII DIMM sockets on
the mainboard.
2. Install DDRII DIMM straight
down into the socket 1 using both
hands, then socket 2.
3. The clip on both ends of the
socket will close up to hold the
DDRII DIMM in place when the
DDRII DIMM reaches the socket
bottom.

3). Install the CPU

The mainboard has built-in Switching Voltage
Regulator to support CPU Vcore
auto-detection. That is, It has the ability to
detect and recognize the CPU voltage, clock,
ratio and enables users to set up the CPU
frequency from the BIOS Setup Screen.
Users can adjust the frequency through
Frequency/Voltage Control of the BIOS
Setup Screen.
The procedures below show you how to
install your CPU and its fan and heatsink. First of all, locate the CPU socket on this
mainboard.
PTM900 Mainboard Manual
2- 3