Chapter 2: Hardware Installation; Central Processing Unit: Cpu; Cpu Installation Procedures - Fujitsu MS-6178MICROATX WH5 User Manual

CHAPTER 2 CHAPTER 2
CHAPTER 2 CHAPTER 2 CHAPTER 2
Chapter 2
HARDWARE INSTALLATION

2.1 Central Processing Unit: CPU

The mainboard operates with Intel
uses a CPU socket called Socket 370 for easy CPU installation. The CPU
should always have a Heat Sink and a cooling fan attached to prevent
overheating.

2.1-1 CPU Installation Procedures

1. Pull the lever sideways away
from the socket. Then, raise
the lever up to a 90-degree
angle.
2. Locate Pin 1 in the socket
and look for the white dot or
cut edge in the CPU. Match
Pin 1 with the white dot/cut
edge. Then, insert the CPU.
It should insert easily.
3. Press the lever down to
complete the installation.
HARDW W W W W ARE INST HARD HARD
HARD HARD
® TM
Celeron processor. The mainboard
Sliding
Plate
2 - 1
ARE INST ARE INST ALLA ALLA TION TION
ARE INST ARE INSTALLA ALLA ALLATION TION TION
Open Lever
Pin 1
White dot/
Cut edge
CPU
Pin 1
Close
Lever
CPU