Boot Up Numlock Status; Gate A20 Option; Typematic Rate Setting; Security Option - Fujitsu MS-6178MICROATX WH5 User Manual

CHAPTER 3 CHAPTER 3
CHAPTER 3 CHAPTER 3 CHAPTER 3

Boot Up NumLock Status

The default value is On.
On (default) Keypad is numeric keys.
Off

Gate A20 Option

Normal
Fast(default)

Typematic Rate Setting

Key strokes repeat at a rate determined by the keyboard controller.
When enabled, the typematic rate and typematic delay can be selected.
The settings are: Enabled/Disabled.
Typematic Rate (Chars/Sec)
Sets the number of times a second to repeat a key stroke when you
hold the key down. The settings are: 6, 8, 10, 12, 15, 20, 24, 30.
Typematic Delay (Msec)
Sets the delay time after the key is held down before it begins to
repeat the keystroke The settings are: 250, 500, 750, 1000.

Security Option

This category allows you to limit access to the system and Setup, or
just to Setup.
System
Setup(default)The system will boot, but access to Setup will
Keypad is arrow keys.
The A20 signal is controlled by keyboard
controller or chipset hardware.
The A20 signal is controlled by port 92 or
chipset specific method.
The system will not boot and access to Setup
will be denied if the correct password is not
entered at the prompt.
be denied if the correct password is not entered
at the prompt.
3-10
AWARD AWARD BIOS SETUP BIOS SETUP
AWARD AWARD AWARD BIOS SETUP BIOS SETUP BIOS SETUP
®