Clear Cmos Jumper: Jbat1/J26 - Fujitsu MS-6178MICROATX WH5 User Manual

CHAPTER 2 CHAPTER 2
CHAPTER 2 CHAPTER 2 CHAPTER 2
2.2 Clear CMOS Jumper: JBA

2.2 Clear CMOS Jumper: JBAT1/J26

2.2 Clear CMOS Jumper: JBA
2.2 Clear CMOS Jumper: JBA 2.2 Clear CMOS Jumper: JBA
A battery must be used to retain the mainboard configuration in CMOS
RAM. Short 1-2 pins of JBAT1/J26 to store the CMOS data.
Keep Data
Note: You can clear CMOS by shorting 2-3 pin, while the system is off.
Then, return to 1-2 pin position. Avoid clearing the CMOS while
the system is on, it will damage the mainboard. Always unplug
the power cord from the wall socket.
1
JBAT1
1
2
3
2 - 4
HARDW W W W W ARE INST HARD HARD ARE INST ARE INST
HARD HARD ARE INSTALLA ARE INST
T1/J26 T1/J26 T1/J26
T1/J26
1
3
J26
3
1
2
3
Clear Data
ALLA ALLA TION TION
ALLATION ALLA TION TION